I’ve obtained most of my parts from Anthony at Haines. Anthony is one of the nicest, knowledgeable and friendly guys you’ll ever meet. He’ll always do his best on prices, but please take into account he’s a one man shop and you’re supporting small business (and they need it right now), plus his stock of parts is staggering!
Haines have moved to their new website which has the latest Fantic, CCM and Gas Gas spares (upto 2020 for Gas Gas) available – https://www.hainesmotorcycles.co.uk/
| Part | Item Identified |
| forks seal kit | All-Balls Racing – 56 – 126 |
| fork bushes kit | All-Balls Racing – 38 – 6053 |
| taper roller headstock bearings | All-Balls Racing – 22 – 1026 |
| rear master cylinder seal kit | All-Balls Racing – 18 – 1079 |
| rear caliper seal kit | All-Balls Racing – 18 – 3050 |
| front caliper seal kit | All-Balls Racing – 18 – 3047 |
| brembo front pads | carbon ceramic 07BB04.CC |
| brembo rear pads | carbon ceramic 07BB02.CC |
| braided hose kit | hel performance HBF0881 |
| rear wheel spoke nipples | 8 gauge / 7.6mm barrel |
| Side Panels | ufo YZ 125 / 250 (96-01) – remove air scoops |
| Fork Protectors | ufo all CR / CRF – will try KTM for a better fit |
| rear mudguard/fender | ufo YZ 125 / 250 (98-02) – cut required |
| led rear light | polisport RSP LED 3.0 |
| front forks | WP 4357 MXMA – google for service manual |
| front wheel bearings | 2 – 60042RS |
| rear wheel bearings | 2 – 60042RS + 1 62042RS |
| swinging arm | my choice – 2 – HK2016.2RS-MB bearings each side plus 1 SD20X26X4A-INA seal, time will tell if this works, but its better than stock |
| caliper bleed nipples | M10 x 1mm |
| fork cap o-ring* | 46810016 – 48 x 2mm |
| fork slider snap ring* | 43570099 – 53 x 2mm |
| ktm fork guard bolts | 59001092050 |
| ktm foot rest springs | 54603041000 |
| ktm foot rest pins | 54603044000 – too long poss KXF450 |
| front master cylinder | yamaha yzf r125 brembo – requires m10 x 1 to m10 x 1.25 adapter – hel performance H8153132C |
| Bearings | refer to pictures in engine bearing section – all koyo – except 3 |
| 1 | 63/22 |
| 2 | 6208CM |
| 3 | suzuki 09262-22028 |
| 4 | 6004rscm |
| 5 | 63052rscm |
| 6 | 62032rscm |
| 7 | 6209CM |
| 8 | 6204cm |
| valve stem seals | suzuki 09289-05015 |
| valve cover o-ring | 3mm x 65mm ID (I think standard is 2.5mm but trying to avoid leaks that people complain about) |
| tappet Adjuster tool | Suzuki 09917-14910 |
| inlet manifolds | Suzuki 13100-04f01 (comes with o-ring fitted) |
| carb float bowl seal | Suzuki 13258-04f00 |
| clutch arm shaft seal | Suzuki 09286-1004 |
| clutch pressure plate bearing | Koyo 62002Z |
| airbox to carb clamps | suzuki 09402-58208 |
| starter bearing | HK1512 |
| starter bearing seal | 15x25x6mm |
| Note: | where posible I buy all bearings, seals and o-rings from a bearing shop. Genuine versions are in many cases up to 10 times the price for the same product, I will only buy genuine if the part is bespoke, like the engine bearing with the spigot. |
| KTM indicator connectors | Female housing – 02T-JWPF-VSLE-S Male housing – 02R-JWPF-VSLE-S Female contact – SWPR-001T-P025 Male contact – SWPT-001T-P025 |
* additonal parts to complete fork rebuild on top of All-Balls Racing kits