Bit of a work in progress, but getting there.
Front mudguard is sorted and am designing some adapters to allow fork guards to fit the 990 forks as the bottom bolt holes are too close together to accept anything ‘off the shelf’.
Currently I’ve designed an adapter that I’ve 3D printed allowing KTM 85SX 2004 – 2017 fork guards to be fitted.
There’s a hidden bolt under the guard which secures the adapter to the fork leg, once I’ve got the design sorted for both sides, as the guards are slightly different on each side, I’ll publish the STL files.
Bolts are M6x16mm countersunk and 2 – M6x20mm flange button head
3D printer files for adapters here.
Currently removed the Z Adventure diffuser from under the fairing, but will see if that can be refitted once I’ve worked everything out.