Recovered the KTM seat, as it had a couple of stains on it. Couldn’t find a cover anywhere so bought some fabric from eBay.
To cover the seat you need approx 900mm x 600m
the steps to recover are –
- carefully remove old staples from existing cover
- centralise new material then start from the middle working out to each end
- In a few places add staples to hold the material then trim excess
- add staples closer in as you tidy things up pulling the material in the remove any creases
most important step is take your time and take lots of photos so you have an idea of how the original was fitted and stapled. I also put a pencil mark on the material to show the centre line.
